VICKERS哪款電磁閥好用（威格士SM4系列伺服閥）概述：

VICKERS哪款電磁閥好用（威格士SM4系列伺服閥）
 SM4-10/12/15 Servovalves, Flows to 57 l/min (15 USgpm) - Pressures to 210 bar (3000 psi).
 SM4-20-10, Flows to 76 l/min (20 USgpm) - Pressures to 210 bar (3000 psi).
 SM4-20-50, Flows to 76 l/min (20 USgpm) - Pressures to 350 bar (5000 psi)SM4-20 (-50 Design) Servovalves.
 SM4-30, Flows to 113 l/min (30 USgpm) - Pressures to 140 bar (2000 psi).
 SM4-40 Servovalves, Flows to 151 l/min (40 USgpm) - Pressures to 350 bar (5000 psi).
 SX4 SX4 Servovalves, Flows to 76 l/min (20 USgpm) - Pressures to 350 bar (5000 psi).  VICKERS液控伺服閥主要是指電液伺服閥,它在接受電氣模擬信號后，相應輸出調制的流量和壓力。它既是電液轉換元件，也是功率放大元件，它能夠?qū)⑿」β实奈⑷蹼姎廨斎胄盘栟D(zhuǎn)換為大功率的液壓能（流量和壓力）輸出。在電液伺服系統中，它將電氣部分與液壓部分連接起來，實現電液信號的轉換與液壓放大。VICKERS電液伺服閥是威格士電液伺服系統控制的核心。
典型的伺服閥由永磁力矩馬達、噴嘴、檔板、閥芯、閥套和控制腔組成(見圖)。當輸入線圈通入電流  VICKERS伺服閥
時，檔板向右移動，使右邊噴嘴的節流作用加強，流量減少，右側背壓上升；同時使左邊噴嘴節流作用減小，流量增加，左側背壓下降。閥芯兩端的作用力失去平衡, 閥芯遂向左移動。高壓油從S流向C2，送到負載。負載回油通過 C1流過回油口，進入油箱。VICKERS伺服閥 閥芯的位移量與力矩馬達的輸入電流成正比，作用在閥芯上的液壓力與彈簧力相平衡，因此在平衡狀態下力矩馬達的差動電流與閥芯的位移成正比。如果輸入的電流反向，則流量也反向。
VICKERS哪款電磁閥好用（威格士SM4系列伺服閥）
VICKERS威格士KBDG5V比例閥
 Vickers Proportional Two-Stage Directional Valves. High Performance with Main Stage Spool Feedback. Pressures to 350 bar (5000 psi). KBFDG5V-5/7/8, 10 Series. Proportional Directional Control Valves. Two-Stage Models Without Electrical Feedback.
參考型號：KBDG5V-5-1*, KBDG5V-7-1*, KBDG5V-8-1*, KBDG5V-10-
VICKERS威格士PCG(5)V單向閥
 Vickers D*8P1-02/03/06/10, DF10P1-20, C2-800 Series, Inline, right angle, C5G-8*5, Inline, right angle, manifold mounted, and pilot operated designs, PCG(5)V 6/8, Pilot Operated Check Valves. DT8PI/C2-8*/C5G-8*, Check Valves. Pilot Operated Check Valves, 4CG-10, 20 Series, 4CS-03, 20 Series, 4CT-06/10, 20 Series.
VICKERS威格士CVI插裝閥
 Vickers Valvister Proportional Throttles to ISO 7368 (DIN 24342) CVCS-**-HFV,
10 Series Covers CVI-**-HFV-A/B,
10 Series, Inserts. Slip-In Cartridge Valves, Valvistor Proportional Throttles.